Chi tiết sản phẩm

Nhà các sản phẩm

100V 30A Charge 200A Discharge Battery Comprehensive Tester For Lithium Battery

Tên thương hiệu:	ACEY
Số mẫu:	ACEY-BIT100-30A200A
MOQ:	1 bộ
Giá bán:	USD 2280~8810/Set
Điều khoản thanh toán:	T/T,PayPal,L/C,Western Union,MoneyGram
Khả năng cung cấp:	200 bộ/tháng

Thông tin chi tiết

Mô tả sản phẩm

Thông tin chi tiết

Nguồn gốc:

Trung Quốc

Chứng nhận:

Bảo hành:

Bảo hành 1 năm với hỗ trợ trọn đời

Dịch vụ hậu mãi:

Hỗ trợ kỹ thuật 24/7

Dải điện áp:

0~100V

Dòng sạc:

0 ~ 30A

Dòng xả:

0 ~ 200A

Độ phân giải hiện tại:

0.001A

Độ chính xác hiện tại:

±(0,1% RD + 0,1 FS)

Nguồn điện đầu vào:

AC 200~240V 50/60HZ

chi tiết đóng gói:

Vỏ gỗ dán

Làm nổi bật:

100V electrical safety comprehensive tester

60HZ electrical safety comprehensive tester

Comprehensive lithium cell testing machine

Mô tả sản phẩm

100V 30A Charge 200A Discharge Battery Comprehensive Tester For Lithium Battery

Product Description

ACEY-BIT100-30A 200A battery comprehensive tester is widely used in production lines and quality control for finished battery packs. Main test functions include open-circuit voltage, AC internal resistance, continuous charge and discharge current and voltage, charge and discharge overcurrent protection, short-circuit protection time, overcurrent delay, and post-test voltage, with testing started by SN input via infrared barcode scanner or automatically triggered by voltage detection, and is suitable for all series lithium-ion power batteries equipped with CH+, P+, CH−, and P− terminals.

Product Features

Real-time monitoring of individual cell voltage dynamics during both charging and discharging processes.
Evaluation of voltage rise after charging and voltage drop after discharging by comparing end voltage with static voltage.
No surge current is generated in the event of power loss or protection MOS cutoff, ensuring the battery protection PCB is not damaged during testing.
Compatible with MES systems for production data integration.
Built-in database with support for Excel report generation.
Step-by-step test mode with automatically adjustable test sequences.
Modular design supporting cabinet expansion to meet future capacity requirements.

Test Items

No.	Test Item	Description	Test Range
1	Voltage Test	The tester measures voltage twice: first as open-circuit voltage, and second after all tests are completed, especially after short-circuit protection testing, to verify battery status. The second voltage is slightly lower than the first.	0–100 V
2	AC Internal Resistance	Measures battery AC internal resistance at 1000 Hz.	0–4000 mΩ
3	Charge Overcurrent Protection Current	Verifies whether the battery activates protection when charging current exceeds the limit. This function is critical to prevent damage to the protection PCB. If not available, continuous charge current is selected instead.	0–30 A
4	Continuous Charge Current	For batteries without charge overcurrent protection, the charge current is typically set to match the charger rating.	0–30 A
5	Continuous Charge Voltage Monitoring	During continuous charging, upper and lower voltage limits can be set to determine whether the battery voltage exceeds the allowed range.	0–100 V
6	Discharge Overcurrent Protection Current & Delay Time	When discharge current exceeds a preset value, protection is triggered automatically. Parameters are usually set according to the battery specification.	0–200 A
7	Continuous Discharge Current	Evaluates whether the battery can sustain normal discharge current. PCB faults may cause failure to maintain continuous discharge.	0–200 A
8	Continuous Discharge Voltage Monitoring	During continuous discharge, voltage upper and lower limits can be set to determine whether the battery voltage is out of range.	0–100 V
9	Short-Circuit Protection Time	Measures protection response time when battery terminals are shorted. Faster response provides better protection. Typical requirement is below 1000 μs. Excessive short-circuit time may result from high loop resistance and should be analyzed. Maximum short-circuit withstand current is approximately 5000 A.	≤1000 μs
10	Test Current Impact	No surge or impact current is generated during testing, ensuring no damage to the battery protection PCB.	—

Main Technical Parameter

Voltage range: 0–100 V, resolution 1 mV, accuracy ±0.1% RD + 0.1% FS.
Internal resistance range: 0–2000 mΩ, resolution 0.001 mΩ, accuracy ±0.1% RD + 0.1% FS.
Charge current range: 0–30 A, resolution 0.001 A, accuracy ±0.1% RD + 0.1% FS.
Discharge current range: 0–200 A; at maximum voltage, continuous discharge current up to 200 A is supported, with resolution 0.001 A and accuracy ±0.1% RD + 0.1% FS (highercurrent ratings available on request).
Overcurrent delay time: 0–30 s, resolution 1 ms, accuracy ±0.1% RD + 0.1% FS.Short-circuit time: 0–2000 μs, resolution 1 μs, accuracy ±0.1% RD + 0.1% FS.
NTC measurement range: 0–100 kΩ, resolution 0.001 K.
R1 measurement range: 0–100 kΩ, resolution 0.001 K.
Operating power supply: AC 200–240 V.
Maximum charging power: 5000 W (at maximum charging current).
Maximum discharging power: 20 kW (at maximum discharging current).
Surge voltage: < 15 V.

Product Display

100V 30A Charge 200A Discharge Battery Comprehensive Tester For Lithium Battery 0

Các thẻ:

Battery Pack Assembly Line

Lithium Cell Grading Machine

Battery Sorting Machine

Battery Pack Spot Welder

Battery Laser Welding Machine

Wire Bonding Machine

Battery Pack Machine

BMS Tester Machine

Battery Comprehensive Tester

Battery Pack Tester

Coin Cell Assembly

Cylindrical Cell Assembly

Pouch Cell Assembly

Chi tiết sản phẩm